Filtration Systems

Filtration systems ensure the purification of your water to the desired micron sensitivity and are the most effective method for removal of suspended solids. Additively, media filtration systems are utilized also in order to remove organic substances and some minerals in the water.

  • Cartridge Units
  • Multi-Cartridge Units
  • Bag filters
  • Separator filters
  • Sand Filters
  • Sand – iron filters
  • Active Carbon Filters
  • Ultrafiltration Systems

Filtration Models

Cartridge Units

  • Cartridge Filter Cups

Are manual filtering systems which retain suspended solid matters (SSM) such as sedimentation, turbidity, particles present in raw water. Employed in systems with low flow rates, these systems consist of transparent polyethylene housing and a washable putrex, stainless steel or nylon cartridge placed inside. They ensure filtration with sensitivities of 1 – 5 – 10 – 20 and 50 µ. Housing lengths are 10″ and 20″.

  • Water Treatment Cartridges

Washable nylon and washable stainless steel cartridges ensure treatment with a sensitivity of 50 microns. Cartridges are cleaned by washing with clean water in periods determined according to the pollution level of water and can be used multiple times.

  • SKM Series Stainless Steel Filter Cups

Putrex, washable nylon and washable stainless steel cartridges with lengths of 10” – 20” – 30” and 40” with sensitivities of 1-5-10-20 and 50 microns can be placed in the housing.

  • PVC Series Filter Containers

PVC model multi cartridge filters are designed for comfortable use at high flow rates and are manual systems which has bodies that are made of PVC material.

  • TFM Bag Filters

Bag filters are used to retain sand, alluvium, suspended solid matter (SSM), organic and inorganic solid matters and other solid particles in water.

  • ZSF Series Stainless Steel Seperator Filters

Systems used for filtration of coarse particles heavier than water, such as sand. This filter’s working principle is the particles in the water that enters the system are thrown down to the inner side walls of the filter by the effect of centrifugal force. The trapped particles are prevented from escaping to the top by means of the particle trap and discharged with the help of the valve.

Sand Filters

  •  FQ Series Automatic Sand Filters

FQ series multimedia systems are designed to provide ideal filtration between 0.6 m3 / h and 26 m3 / h, and fully automatic valves are used as control units.

  • FQM Series Manual Sand Filters

FQM series multimedia systems, designed to provide ideal filtration between 0.6 m3 / h and 26 m3 / h, are manually controlled systems and provide economical use advantage.

  • FQY Series Automatic Sand Filters

FQY Series multimedia systems are systems designed with surface piping in order to provide filtration between 9 m3 / h and 60 m3 / h. Systems with FRP tanks are managed by a panel containing PLC using pneumatic or electric actuated valves and can automatically filter and reverse flushing without human intervention.

  • EQ Series Automatic Sand Filters

EQ series multimedia systems will be able to provide ideal filtration between 9 m3/h and 212 m3/h, and can be used effectively in many industrial establishments where water utilization is high,  especially in textile, chemistry and food sectors. Surface piping multimedia filters are designed with pneumatic (air), water and electric actuated valve system. The system is managed by an IP 65 class panel that can backwash according to time or flow rate, control the service automation, and it includes a controller or PLC. As the tank material, ST 37 carbon steel with epoxy coated inner and outer surfaces is used. Depending on the requirement, stainless steel and galvanized carbon steel tanks can also be used.

Sand Iron Filters

Sand iron filters are designed for removing iron, turbidity, suspended solids, sediment, etc. fully automatic valves are used as the control unit. The system automatically performs reverse washing according to the time set on the valve without the need for human intervention. After cleaning the deposits accumulated in the media bed by removing it from the drainage line, it returns to the service position.

  • FQB Series Automatic Sand Iron Filters
  •  FQBY Series Automatic Sand Iron Filters
  • EQB Series Automatic Sand Iron Filters

Activated Carbon Filters

  • FC Series Automatic Activated Carbon Filters

FC series activated carbon filters are used to remove taste, odor, residual chlorine and organic matter in water between 0.6 m3 / h and 26 m3 / h flow rate. The system automatically performs reverse washing according to the time set on the valve without the need for human intervention and returns to the service position after cleaning the deposits accumulated in the media bed by removing it from the drainage line.

  • FCY Series Automatic Active Carbon Filters

FCY Series activated carbon filters are used to remove taste, odor, residual chlorine and organic matter in water between 9 m3 / h and 60 m3 / h. Systems with FRP tanks are managed by a panel containing PLC using pneumatic or electric actuated valves and can automatically filter and reverse flushing without human intervention.

  • EC Series Automatic Activated Carbon

EC series activated carbon filters are used to remove taste, odor, residual chlorine and organic matter in water between 9 m3/h and 212 m3/h. It can be used effectively in many industrial establishments where water utilization is high, especially in textile, chemistry and food sectors.

Ultrafiltration Systems

  • UFSL Series Ultrafiltration Systems

UFSL series ultrafiltration systems can be designed from 4 m3 / h capacity to the desired capacity. UF Membranes are in capillary tube (capillary) structure. It works with the cross flow method, the raw water entering through the capillary pipes with the help of pumps that do not require high pressure passes through the pores of 25 angstroms on the membrane surface and the purification process is carried out.

Nanofiltration Systems

  • NFSL Series Nano Filtration Systems

Nanofiltration is a membrane separation method that has been used recently and its molecular weight limit is between ultrafiltration and reverse osmosis. It is generally used to remove bacteria, viruses, organic residues and hardness. In a case where other alternatives are not suitable, nanofiltration can be used instead of demineralization, color removal, COD removal, waste water recovery.

Our Products

CART

X